Onkyo HTP-528 Bedienungsanleitung Seite 5

Getting to know Your Speaker Package—Continued
Subwoofer (SKW-501)
■ Front
SKW-501
c STANDBY/ON indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-501
automatically turns on when an input signal is
detected in Standby mode. When there's no input
signal for a while, the SKW-501 automatically
enters Standby mode.
d OUTPUT LEVEL control
This control is used to adjust the volume of the
subwoofer.
e LINE INPUT
This RCA input should be connected to the
subwoofer pre out on your AV receiver with
supplied RCA cable.
Note:
The Auto Standby function turns the subwoofer on when
the input signal exceeds a certain level. If the Auto
Standby function does not work reliably, try slightly
increasing or decreasing the subwoofer output level on
your receiver.
■ Rear
c
To AC outlet
Using the Floor Pads for Subwoofer
If the subwoofer is placed on a hard floor (wood, vinyl,
tile, etc.) and playback is very loud, the subwoofer's feet
may damage the flooring. To prevent this, place the
supplied pads underneath the subwoofer's feet. The pads
also provide a stable base for the subwoofer.
SKW-501
d e
SKW-501
Pad
5
En-