Kemot URZ3368 Bedienungsanleitung Seite 7

Owner's manual
top view
side view
Fig. 4
unit (m)
COVERAGE ANGLES
(1) Switch off the power source.
(2) Remove the mounting bracket from the Led floodlight.
Drill the wall and screw the bracket onto the wall using suitable
plastic wall plugs and screws. Check that the bracket is securely
fitted on the wall.
EN
Note: Do not at this stage re-attach the floodlight to the bracket.
(3) Connect the power cords.
• green-yellow - grounding
• red - L
• green - N
(4) Re-attach the floodlight to the bracket and secure the cable to
the wall using suitable clips. Ensure that the cable is not touching
the body of the floodlight, and that there is sufficient slack in the
cable to allow the floodlight to be tilted and adjusted as required,
which should be done by grasping the metal body of the floodli-
ght, not its rear wiring box (fig. 5).
7