Herunterladen Diese Seite drucken

Perel Tools EFLCB1 Bedienungsanleitung

Farbwechsel-kugel(n)

Werbung

EFLCB1 / EFLCB3 – COLOUR-CHANGING ORB(S)
1. Introduction
Thank you for buying the EFLCB1/EFLCB3! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer. Your set should include:
• 1 or 3 colour changing balls (depending on the model number)
• 1 charging base for 1 or 3 balls
• 1 adapter 7.5Vdc / 300mA for the EFLCB1 or 7.5Vdc / 500mA for the EFLCB3
• This manual
2. Use
Unpack everything carefully. The ball's battery will probably be depleted. Insert the AC/DC adapter into the
recharging base and place the ball correctly on its pad. The LED indicator next to the ball will change from green to
red. When fully charged, the ball can be removed from its pad and placed anywhere in your house. It will function for
about 8 hours continuously.
On the bottom of the ball is a small push button that enables the different functions:
• Push the button for a few seconds until it switches on.
• When the ball is on, press the button repeatedly to go through the programmed sequence: green, blue, red,
purple, white, constant changing colour, slowly glowing changing colour.
• To switch it off, keep the button pressed for a few seconds until the ball switches off.
IMPORTANT: Do not leave the orbs to recharge for more than 24 hours continuously!
3. Technical Specifications
Ball diameter:
Base size:
Stand-alone time:
Charging time:
Adapter:
The information in this manual is subject to change without prior notice.
EFLCB1 / EFLCB3 –SFEERVOLLE GLOEIBOL(LEN)
1. Inleiding en kenmerken
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Als het toestel werd
beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer. De set zou moeten bestaan uit:
• 1 of 3 van kleur veranderende bollen (afhankelijk van de productcode)
• 1 laadstation voor 1 of 3 bollen
• 1 adapter 7.5Vdc / 300mA voor de EFLCB1 of 7.5Vdc / 500mA voor de EFLCB3
• Deze handleiding
2. Gebruik
Pak alles zorgvuldig uit. De batterij in de bol zal waarschijnlijk leeg zijn. Sluit de adapter aan op het laadstation en het
lichtnet en plaats de bol(len) juist op het station. De LED naast de bol moet van groen in rood veranderen. Wanneer
de bol volledig opgeladen is, kunt u de bol van het laadstation nemen en hem eender waar in uw huis plaatsen. Een
volledig opgeladen bol kan ongeveer 8 uur continu licht geven.
EFLCB1 - EFLCB3
8.30 cm
9.50 x 9.50 x 2.50 cm (EFLCB1) or 19.00 x 19.00 x 2.50 cm (EFLCB3)
up to 8 hours
approx. 9 hours
7.5Vdc / 300mA (EFLCB1) or 7.5Vdc / 500mA (EFLCB3) (included)
1
PEREL

Werbung

loading

Inhaltszusammenfassung für Perel Tools EFLCB1

  • Seite 1 EFLCB1 / EFLCB3 – COLOUR-CHANGING ORB(S) 1. Introduction Thank you for buying the EFLCB1/EFLCB3! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer. Your set should include: •...
  • Seite 2 IMPORTANT: ne laissez pas les globes à recharger pendant plus de 24h en continu. 3. Spécifications techniques Diamètre globe: 8.30 cm Dimensions station de recharge: 9.50 x 9.50 x 2.50 cm (EFLCB1) ou 19.00 x 19.00 x 2.50 cm (EFLCB3) Autonomie globe chargée: ± 8 heures Temps de recharge: env.
  • Seite 3 • 1 ó 3 bolas multicolores (según el código del producto) • 1 estación de carga para 1 ó 3 bolas • 1 adaptador 7.5Vcc / 300mA para la EFLCB1 ó 7.5Vcc / 500mA para la EFLCB3 • Este manual del usuario 2.
  • Seite 4 9.50 x 9.50 x 2.50 cm (EFLCB1) Abmessungen der Ladestation: 19.00 x 19.00 x 2.50 cm (EFLCB3) Stand-alone Zeit: bis zu 8 Stunden Ladezeit: ± 9 Stunden 7.5Vdc / 300mA (EFLCB1) oder 7.5Vdc / 500mA (EFLCB3) (mitgeliefert). Adapter: Änderungen vorbehalten. EFLCB1 - EFLCB3 PEREL...

Diese Anleitung auch für:

Eflcb3