GRAVITY MS 3122 HDB Bedienungsanleitung

MS 3122 HDB
SHORT HEAVY DUTY MICROPHONE STAND
WITH FOLDING TRIPOD BASE
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
FEATURES
• Short tripod microphone stand
• Extra heavy base with short legs
• Standard telescoping boom with 88 cm maximum length
• Ideal for bass drum micing
DESCRIPTION
Ideal for bass drum micing, the GMS 3122 HDB is a premium quality micro-
phone stand with thick walled tubing, powder coated finish and 32 cm
height. The tripod base is made of die cast zinc while the legs are made
of strong and heavy folding steel. Hefty rubber cabs for surface protection
complete the picture of the stand.
The boom hub features precision 2-point tilt and position adjustment of the
telescoping arm. A quick fastener allows for easily variable extension to a
maximum length of 88 cm, and the custom designed retainer requires no
tools for quick and secure mic clip attachment.
A set of black coding rings is included with the GMX 3122 HDB, additional
ring packs are available in a wide array of colors for instant personalization.
SPECIFICATIONS
Product number GMS3122HDB
Product type Stands and Tripods
Type Microphone Stands
Tubing material Steel
Tubing color Black
Tubing surface Powder coated
Max. height 320 mm
Transport length 500 mm
Height adjustment No
Base type Tripod
Base material Zinc die-cast
Boom model 2-point adjustment
Boom length 880 mm
Interchangeable rings 1 x 25 mm, 2 x 15 mm, 3 x 20 mm
Black ring pack Yes
included
Weight 2.84 kg