GRAVITY GKSTS01B Bedienungsanleitung

GKSTS01B
Keyboard stand table T-Form
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Super sturdy construction
Suitable for heavy keyboards
Highly adjustable
Varifoot® included
INTRODUCTION
This keyboard stand with table-like construction offers superior stability making it is
particularly suitable for heavy keyboards. It is height-adjustable in small incremental
steps, making the stand suitable for both seated and standing applications. The
legs can be fitted in two basic configurations – either perpendicular to the vertical
structure or angled outwards slightly – the latter configuration offers additional stabi-
lity and more leg room. The top rests can be adjusted to the width of the keyboard
and can also be angled in small incremental steps over a range of 360 degrees.
All in all, this solid steel construction comprises all features possible in such a design
without compromise.
For transport, both the legs and the top rest can be folded inwards, resulting in a
very compact transport height. The stand includes one Varifoot® leveling foot to
compensate for ground irregularities.
SPECIFICATIONS
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Product type:
Type:
Material:
Surface:
Colour:
Decks:
Support arm length:
Support arm spacing adjustment range:
Min height:
Max height:
Width:
Width when folded:
Max. load (support):
Interchangeable rings:
Black ring pack included:
Weight:
Stands and Tripods
Keyboard stand
steel
powder coated
black
1
340 mm
230 mm – 730 mm
735 mm
1155 mm
950 mm
1300 mm
90 kg
6 x 20 mm, 6 x 30 mm
yes
6.9 kg