Installation; Operation And Use - Niko 350-10032 Bedienungsanleitung

350-10032
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
The day/night switch 350-10032 is designed for controlling exterior lighting. Areas of
application: parking garage, outfields, pavements.

2. INSTALLATION

Wiring diagram, see fig.4.
Positioning
In order to achieve optimum lighting control, you are recommended to position the day/
night switch 350-10032 facing north/east. Make sure the sensor is not affected by other
light sources or by the light itself being controlled. Changes in the daylight level as a result
of reflections, falling leaves, cut down or newly planted trees can alter the switching times.
Note: After the Minilux is connected, the light is switched on for ±30s. Depending on the
light level or the settings, the light is switched off or remains switched on.

3. OPERATION AND USE

The day/night switch 350-10032 is automatically activated if the daylight level drops below
the set lux level (adjustable between 2-200lx) and is deactivated if the daylight level rises
above the set light value. The built-in time delay of ±1min makes sure the sensor is not
influenced by brief light modifications (fig.5).
Fabric settings
lux level: 35lx
Use the lux button to set the lux ON value (fig.5).
The LED is an aid for setting the sensor and operates without time delay. The LED lights if
the measured light level drops below or rises above the preset lux value.
EN 7
PM350-10032R19295.indd 7 9/09/19 15:14