Philips GirlGLAM HP4680 Bedienungsanleitung Seite 8

ENGLISH
8
Before you start styling, comb or brush the hair so that it is
untangled and smooth.
Connecting the attachments
1 Insert one of the attachments into the handle. Make sure that the
stand is pointing downwards (fig. 1).
2 Turn the locking ring on the handle to the left until the bold
arrow on the locking ring is in line with the arrow on the handle.
The attachment is now securely fixed to the handle (fig. 2).
Follow this procedure for all attachments. To detach the
attachments, turn the locking ring to the right and pull the
attachment out of the handle.
Unplug the appliance when you remove an attachment after or
during styling. Avoid touching the metal and ceramic parts of the
attachment, as they are hot.
Using the appliance
With the GirlGLAM styler you can create large rounded curls, ringlets,
crimps, triangular curls and a straight, sleek look.
1 After having connected the attachment to the handle, place the
appliance on the stand of the attachment and put the mains plug
in the wall socket. The pilot light goes on and the appliance starts
heating up (fig. 3).
2 Start styling when the ready dot on the attachment changes
colour (fig. 4).
3 When using one of the curling attachments, always make sure
the end of the lock is wound in the required direction.
4 How long you have to keep the styler in the hair depends on the
thickness of the hair. In case of fine hair, 5 seconds will be long
enough for a good result. Leave the styler in the hair longer
(max. 10 seconds) if the hair is thicker.