Operation - RUSTA 906512310101 Gebrauchsanweisung

OPERATION

Warning! Ensure that there is sufficient distance from the wall, fixtures or other applian-
ces. The distance must be at least 1.5 m from the front and sides wall of the appliance to
exclude the risk of fire.
1. Take the appliance and all the accessory parts out of the packaging.
2. Check that the appliance shows no signs of damage.
3. Select a location that is firm, level and incombustible.
4. Insert the mains plug into a suitable wall socket with 220 – 240 V~50/60Hz and be sure
power switch is on " OFF" position.
OPERATION INSTRUCTION
1. Remove heater products and spare parts from the paper box, place on firm level ground or
desktop.
2. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
3. Setting the master button to "off". Plug the cord set into a 220-240v~AC electrical outlet.
Turning the master button "on" position.
4. Turn the heater ON by pressing the ON/OFF main button.The unit will display the current
Room temperature.
5. Press the -button to start the unit.
6. Press the and
to heat when the environment temperature is 2° below the setting temperature. It will
stop heating when selected temperature has been reached. The setting temperature
range is 5–37°.
7. To set the temperature: press once for 1000W, twice for 1300W and a third time for 2300W.
Press a fourth time to choose the Prevent Frost setting.
Prevent frost:
• When the temperature is 5° - the 1000W mode will set in.
• When the temperature is 4° – the 1300W mode will set in.
• When the temperature is below 3° – the 2300W mode will set in.
• When the temperature is above 6° – the thermal switch will activate to prevent
overheating.
8. By pressing , you can set the timer from 1–24 hours.
9. Press the to start or stop the fan. The fan icon will be lit on the screen when in use.
The fan option can only be used with 1000W/1300W/2300W. The fan automatically shuts
off when switching to other work modes.
10. Press the -button to choose between Fahrenheit or Celsius scale.
-button to increase or decrease the temperaturesetting. It starts
5