Precautions After Operation - TOHATSU VC85BS Betriebsanleitung

(1) Maintenance after pumping seawater or foul water.
After pumping seawater or foul water, the pump should be flushed out
with fresh water immediately to prevent excessive corrosion.
And operate the vacuum pump for 5 seconds at low engine speed in
order to clean the vacuum pump.
The inside of the pump can be easily cleaned by using the "RC Hopper"
(optional).
11
Using the RC Hopper (can be installed on pump with suction inlet dia.
3" JIS fire thread.)
①Attach the RC Hopper to the suction port.
②Fill RC Hopper with fresh water while opening discharge valve, until
pump is filled with water. And close discharge valve.

PRECAUTIONS AFTER OPERATION

RC Hopper
- 22 -