Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
direction of rotation the machine can
shoot away unexpectedly.
_
For greater cutting depths it is
recommended to make several shallow
cuts with increasing take-up.
_
Bring the machine after use into its rest
position before switching off.
_
Switch off the machine and wait for the
cutter to come to a standstill before
putting the machine down.
_
Unplug the tool when finishing the cutting
activities or when the machine will not be
used for a longer period of time.
Switching on and off (fig. A)
_
To switch the machine on, press the on/
off switch (1).
_
To adjust the cutting speed, turn the
adjusting wheel (2).
_
To switch the tool off, release the on/off
switch.
Quick-selecting the cutting depth (fig. D)
Using the revolver-depth stop it is possible
to quick-select between pre-set cutting
depth positions. The position right below the
depth stop (6) defines the cutting depth.
_
Lift the revolver-depth stop (7) from its
current fixing point and turn the desired
cutting depth position to the position
below the depth stop (6).
_
Make sure that the revolver-depth stop is
secured in the fixing point.
_
Follow the instructions below 'Setting the
cutting depth'.
Dust extraction (fig. H)
The dust extraction connection (19) together
with an external vacuum cleaner takes care
of the dust extraction of the working surface.
_
First remove the cutter from the holder.
_
Mount the dust extractor (19) as shown in
the illustration.
_
Slide the suction mouth of a vacuum
cleaner onto the connection.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
_
Regularly clean the ventilation slots.
TECHNICAL DATA
Mains voltage V
Mains frequency Hz
Power input W
No load speed min-1
Cutting depth mm
Spindle diameter cutter mm
Weight kg
Level of sound pressure measured
according to EN 60745-2-17:
LpA (sound pressure) dB(A)
LWA (acoustic power) dB(A)
230
50
1,050
11,500 - 30,000
44
6
3.5
92.5
103.5
Take appropriate measures
for the protection of hearing.
Weighted root mean square acceleration
value according to EN 60745-2-17: < 5.5 m/s²
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
Made in China
replacement after
dispose of it in an
2010
Werbung
Inhaltsverzeichnis
