AGPtek BLS1 Kurzanleitung Seite 5

 Operating Instructions
 Headlight:
1. Power capacity indication: When power is Sufficient, LED is green.
When power is Insufficient, LED is red.
2. Charging indication: When charging the headlight, LED is red.
When fully charging, LED is green.
3. Light modes: Press the operation button to cycle through the
different modes: High/Low/Strobe/Off.
 Taillight :
1. Power capacity indication: When power is insufficient, it will
automatically turn off.
2. Charging indication: When charging the taillight, LED is red. When
fully charging, red LED is off.
3. Light mode: Press the operation button to cycle through the
different modes: 1 Steady light & 3 Flashes.
 Installation & Remove Notes
How To Installation:
① Remove the screw
③ Tighten the screws
② Mounted to bicycle
④ Insert the light to its base
3