Promate BoltQC Kurzanleitung Seite 3

Appearance & Interface Description:
1. 2.4A USB Output Port
2. Quick Charging 3.0 Port
3. Micro-USB Input Port
4. Multi-Function Button
Operation Instructions:
Checking the remaining power left in BoltQC back-up battery
• In order to view the amount of power left in BoltQC, short press the Multi-function Button. The LED
Indicator will light up indicating the amount of battery left in BoltQC.
No of LED's Active
% of power remaining
Charging BoltQC back-up battery
• Connect one end of the Micro-USB Cable to BoltQC and the other end to a desktop/laptop or a USB Power
Adapter. The Battery Level LED Indicator's will light up indicating that the back-up battery is charging normally.
Charging USB chargeable devices using BoltQC
• There are 2 USB ports available on BoltQC.
• Use the QC3.0 output port to charge smartphones supporting Quick Charging 3.0.
• Use the 2.4A port to charge all other Smartphones & Tablets.
• Plug the USB cable into the required USB output port on BoltQC back-up battery and the other end into
the device. The back-up battery would automatically start charging the connected device.
Note: Devices that do not support QC 3.0 Charging will be charged at optimum charging capacity when
plugged into the QC3.0 port
3. 4.
1.
2.
1 2
<=25% <=50%
English
3 4
<=75% <=100%
2