Wiring Your Controller - Rockwell Allen-Bradley MicroLogix 1000 serie Installationsanleitung

Installation Instructions
MicroLogix 1000 Programmable
Controllers
Sinking and Sourcing
Type:
Sinking Input
Sourcing Input

Wiring Your Controller

Wire Type: Wire Size: (2 wire maximum per terminal screw)
Solid #14 to #22 AWG
Stranded #16 to #22 AWG
Important: The diameter of the terminal screw head is 5.5 mm (0.220 in.). The
input and output terminals of the MicroLogix 1000 controller are
designed for the following spade lugs:
We recommend using either of these AMP spade lugs: part number
53120-1, if using 22–16 AWG, or part number 53123-1, if using
16–14 AWG.
6
Definition:
The input energizes when high level voltage is applied to the
input terminal (active high).
The input energizes when low level voltage is applied to the input
terminal (active low).
Call out
C
E
L
W
X
C+X
Dimension
6.35 mm (0.250 in.)
10.95 mm (0.431 in.) maximum
14.63 mm (0.576 in.) maximum
6.35 mm (0.250 in.)
3.56 mm (0.140 in.)
9.91 mm (0.390 in.) maximum