Optional Parts; Warranty - MasterCool MASTERCLEANSE series Bedienungsanleitung

and check for flow. If the flow is normal, then the flow through the item is too low to flush.
• The filter screen may be dirty. Follow the cleaning the filter screen procedure.
• The inlet to the pump may be clogged. Look into the tank and make sure the pickup tube looks clear. Remove the tube
from the inlet to the pump and make sure there is plenty of flow.
• The pump may be worn. If none of the above allows fluid to flow, put the hose for flow out of the machine
suitable container and turn the pump on. There should be significant flow. If not, contact the distributor.

OPTIONAL PARTS:

69925 Adapter Kit
91092-A Flush Gun
REPLACEMENT PARTS:
69900-FS
69900-FSO
42010-10
69900-001
69900-001-220
69901-008

WARRANTY:

MASTERCOOL Inc.® warrants this product against defects in material and workmanship for a period of one year from
date of purchase to original user. This warranty does not cover failure due to abuse, improper usage, neglect or progres-
sive wear and tear. Warranty service is provided through the factory only. Please contact the service department toll free
for parts, service concerns, or to obtain a return authorization number for warranty repair.
WARNING: This product can expose you to chemicals including lead and Di (2-ethylhexyl) phthalate, which are known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
6
Filter screen
Filter screen O-ring
Hose gaskets (10 pcs)
110 V / 60 Hz pump
220V / 50/60 Hz pump
Internal regulator for european models
www.mastercool.com
into a
4