Ip Setup; Backup Configuration; Restore Configuration - 3Com Baseline Switch 2250 Plus Installationsanleitung

30 C 4: C
HAPTER ONFIGURING THE

IP Setup

To set the IP address for the Switch:
Click Administration, then IP Setting on the menu.
1
The IP Settings screen appears. Follow the IP Setup
Wizard to complete the setup.
This wizard can also be used to set system name,
location and contact information.
Figure 12 IP Settings Screen
S
WITCH

Backup Configuration

To save the Switch configuration settings:
Click Administration, then Backup Configuration on
1
the menu. The Backup Configuration screen appears.
Figure 13 Backup Configuration
Click OK. You will be prompted to provide a location
2
where the configuration file will be saved.

Restore Configuration

To reload configuration settings that you previously
saved to a file:
Click Administration, then Restore Configuration on
1
the menu. The Restore Configuration screen appears.
Figure 14 Restore Configuration
Click Browse to locate the backup file on your
2
computer to restore the configuration settings.