LaCie Hub Schnellstartanleitung Seite 6

Feed the cables through the hole in the cover; place the cover on the Hub
6
and twist the cover to the right to lock it in place.
VIOLET
GREEN
RED
7
Connect and use your USB and FireWire 400 devices.
NOTE: If you plug too many bus-powered devices (such as 2.5" USB hard drives)
into your Hub, it may not provide sufficient power to operate all your devices. In this
case, you will need to use the included external power supply.
FIREWIRE
NOTE: To increase your Hub's stability, we suggest bending one or two interface
6-PIN MALE
cables level with your work surface.
FIREWIRE
6-PIN FEMALE
TO DEVICE
POWER SUPPLY PORT