Before Using Your Fridge; How To Operate The Appliance; Thermostat Setting; Warnings About Temperature Adjustments - Finlux KG178A+ AK Bedienungsanleitung

• Installation procedure into the kitchen unit is given in the installation manual. This
product is intended to be used in proper kitchen units only.
• Before using your fridge, wipe all parts back with warm water added with a tea spoonful
of sodium bicarbonate, and then rinse with clean water and dry. Replace all parts after
cleaning.

Before using your fridge

• When it is operated for the first time or after transportation, keep
your fridge in the upright position for 3 hours and plug it on to allow
efficient operation. Otherwise, you may damage the compressor.
• Your fridge may have a smell when it is operated for the first time; the smell will fade
away when your fridge starts to cool.

HOW TO OPERATE THE APPLIANCE

PART - 2.

Thermostat setting

The freezer thermostat automatically regulates the inside temperature of the compartments.
By rotating the knob from position 1 to 5, colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
Freezer & Refrigerator thermostat setting;
1 - 2 : For short-term storage of food in the freezer
compartment, you can set the knob between
minimum and medium position.
3 - 4 : For long-term storage of food in the freezer
compartment, you can set knob to medium position.
5 : For freezing the fresh food. The appliance will run
for colder temperatures.

Warnings about temperature adjustments

• It is not recommended that you operate your fridge in environments colder than 10°C in
terms of its efficiency.
• Temperature adjustments should be made according to the frequency of door openings
and the quantity of food kept inside the fridge.
EN - 25 -
Thermostat knob