Intended Purpose - rotho Top Bedienungsanleitung

• Item no. 20030 – BIO bathtub:
bathtub stand item no. 20450 and 20451
drain hose item no. 20069
• Item no. 20020 – Bella Bambina bathtub:
bathtub stand item no. 20450 and 20451
drain hose item no. 20069

Intended purpose

The bathtub must not be used on a bathtub stand af-
ter the child has started trying to stand up on its own.
The bathtub insert can be used until the child can sit
without support.
If the bathtub or bathing aid shows the symbol for the maximum water
level ( ) to be used, never fill with water above the line shown!
Maximum load for bathtub including water and child:
25 kg. For the TOP Xtra bathtub: 50 kg.
Cleaning and maintenance recommenda-
tions:
Clean the product with a soft cloth and soapy water.
For the safety of your child
Always observe
the following safety notes!
Assembly instructions for the bathtub insert
TOP bathtub insert (item no. 20503) in TOP bathtub (item no. 20001)
and TOP Xtra (item no. 20500):
1. Mount the bathtub insert on the bathtub handle without a sticker
showing the Rotho Babydesign logo.
2. Ensure that the suction cup is firmly stuck to the base of the bath-
tub. To fix the bathtub insert in place, press the suction cup firmly
against the base of the bathtub.
StyLe! bathtub insert (item no. 20212) in StyLe! bathtub
(item no. 20211):
1. Mount the bathtub insert on the side where the bathtub handle
does not have a depression.
2. To fix the bathtub insert in place, press the suction cup firmly
against the base of the bathtub.
TOP/TOPXtra 20001/20500 + 20503
StyLe! 20211 + 20212
7
EN