Technical Specifications - xtpower XT-400Wh Anleitung

3. Do start the vehicle.
4. Disconnect the clamps with battery and the jumping port of your portable power supply.
The first step and the second step can be exchanged. Only when the indicator light of the clamps
turns to green, then you can start you vehicle.
Important Information
1. Before starting, make sure the red and black clips are clamped tightly to the battery poles of your
car, keep the two clips with enough safety distance, to prevent the two from falling off or collision
because of the engine vibration after car starting.
2. It is strictly prohibited to connect the red and black clip directly, otherwise it may cause accidents.
3. Please keep away from the engine when starting the vehicle to avoid any physical injury that
may caused by car engine running.
4. Please remove the product from battery within 30 seconds after engine started, otherwise it
might cause damage to the portable power supply or even cause accident.
5. Please check the battery capacity before every re-start. Make sure the power is over 60% (four
battery segments on).
6. People who are not familiar with this product (especially children) are strictly prohibited to use
this function.

5. Technical Specifications

Battery Capacity
Input
Output
Operation
Environment
AC Adapter
Car Charger
Solar Panel
AC Output
Jump Starer Outlet
USB Output
DC Output
Cigarette Lighter Socket
Charge
Discharge
Humidity
400Wh
14V~40V (Standard: 72W / 29.4V)
12V / 24V
10A (Max)/14V~40V
220V-50Hz
12V / 600A (Peak)
5V / 2×2.1A & 2x1A (Max)
12V / 3A
12V / 120W
0 ~ 45°C
-10 ~ 60°C
10%~90%
10