Cleaning And Maintenance - Azura HA-INDUC-10 Anleitung

• Do not operate the device if it is damaged in any way or does not function properly.
• The use of accessories and spare parts not recommended by the manufacturer may lead to
damage on the device and injuries.

Cleaning and maintenance

• Pull the power plug prior to cleaning the device. Do not use any caustic cleaning agents and make
sure that no water penetrates the device.
• To protect yourself from electric shock, never immerse the device, its cables and the plug in water
or other liquids.
• Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
• Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
• Do not use any petrol products to not damage the plastic parts and the casing/operating panel.
• Do not use any flammable, acidy or alkaline materials or substances near the device, as this may
reduce the service life of the device and lead to deflagration when the device is turned on.
• Make sure that the bottom of the cookware does not scrape across the surface of the ceramic field,
although a scratched surface does not impair the use of the device.
• Make sure that the device was properly cleaned before storing it in a dry place.
DETAILS OF CODE NO. AS FOLLOW:
E01: Electronic control of low voltage. (<160V)
Self-help: Make sure the appliance is connected to the voltage indicated on the rating label.
E02: Electronic control of excess voltage (>270V)
Self-help: Make sure the appliance is connected to the voltage indicated on the rating label.
E03: IGBT open or short circuit.
Self-help: Please send back to customer service.
E05: Overheating protection on power mode (>150°C)
Self-help: Eliminate the course of overheating. Once the cooktop has cooled, the appliance can be put
into operation again.
E06: Temperature sensor open or short circuit
Self-help: The temperature sensor underneath the glass ceramic plate is defective. Please send back
to customer serivce.
E07: Overheating protection on TEMP. mode (>240°C)
Self-help: Eliminate the course of overheating. Once the cooktop has cooled, the appliance can be put
into operation again.
E08: Temperature sensor malfunction
Self-help: Please send back to customer service.
Remarks:
• Power function: default max.temp. At 170°C, so for steam food or boil water, please select power
function
• Temp. Function: default max.temp. At 240°C, so for grill or deep fry food, please select temp.
Function.
• After over heat cooking, please return your device to your supplier
• When operate the device, please put on pan/pot firstly.
4