Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OCEAN S6
Description of the functions
Cleaning stop:
Serves to disable the fitting prior to cleaning.
User detection
When you step in front of the
shower, the system will detect
you. The illuminating icon
begins to pulse slowly.
30-70 cm
Enable cleaning stop
Approach the infrared sensor
with your hand (see image).
After 2 s, the ON/OFF icon will
start to pulse. In the mean-
time, use your free hand to
tap the ON/OFF icon and thus
enable the cleaning stop. The
cleaning stop remains enabled
for 10 min after leaving the
sensor range.
Shower control
Disable cleaning stop
The function automatically
stops if no user was detected
for 10 minutes.
You can manually disable the
function following the same
procedure used to enable it.
The fitting will resume normal
operation with a safety delay
of 3 s after you leave the
sensor range.
WimTec OCEAN S6
EN
35
Werbung
Inhaltsverzeichnis
