Philips HR 2700 Gebrauchsanweisung Seite 5

CIeaning
• Switch off and remove the mains plug from the wall
socket before cleaning. Wait for the circular blade
to come to a complete standstill.
• Never immerse the basic appliance (i.e. the part
containing the motor) into water or any other
fluid. Do not rinse either.
• Clean the appliance with a damp cloth immediately
after use, including the circular blade. Do not use
any scouring cleaning materials. Do not clean in a
dishwasher.
Attention: the blade is very sharp.
Circular blade
To disassemble the circular blade:
- Fold up the support table (fig. 16). Remove it from
the hinge.
- Rotate the blade lock a quarter turn clockwise
(fig. 17).
When the lock is in a vertical position the circular
blade can be removed (fig. 18).
To reassemble the circular blade:
- Rotate the blade lock a quarter turn anti-clockwise.
When the lock is in a horizontal position the
circular blade is fixed.
Ensure that the blade is safely assembled
before switching on.
- Replace the support table (fig. 19).
Stop plate
To disassemble the stop plate:
- Turn the control knob anti-clockwise until it stops
("Click!") (fig. 20).
- Then take off the stop plate (fig. 21).
To reassemble the stop plate:
- Insert the stop plate, press on lightly and turn the
control knob clockwise (fig. 22).
5