Salter Easyfill Bedienungsanleitung Seite 3

2. to fill the mill:
The Easyfill Electronic mill can be used to grind both coarse sea salt
or peppercorns with its dual purpose ceramic mechanism.
notE: Rock salt is not recommended and could damage the
mechanism.
To fill, first ensure the grind mechanism is closed by turning
clockwise the central post at the top of the mill. Turn the funnel part
of the mill by 180 degrees (it will twist in either direction) to expose
the fill holes. Pour salt or pepper into the funnel. Ensure any excess
is removed before closing the funnel (turn 180 degrees).
7604-0211-01.indd 3
2.
3. to use the mill:
Ensure the power switch on the base of the mill is turned to the
ON position.
Adjust the grind mechanism according to your preference for fine
or coarse ground salt/pepper. TIP: To prevent peppercorns/salt from
blocking the mechanism when adjusting from coarse to fine, keep
the mill running when making the adjustment. n.B. the fully open
setting is for coarse ground pepper only, salt will pour out on
this setting so ensure it is adjusted accordingly. Turn clockwise
for a finer grind, anti-clockwise for coarser.
Invert the mill over your food to start the grind mechanism. The
mechanism will start automatically when the mill is held upside-
down. To stop, return the mill to the upright position.
3.
ON
OFF
3
GB
23/02/2011 14:3