Magic Leap One Sicherheitshinweise Seite 4

Steps to Take Before Using the Device
Before using Magic Leap One, you should read and follow all setup
and operating instructions provided with the device and on the
device. For example, before using Magic Leap One for the first time,
be sure to go through the Fitting Guide and Visual Calibration, both
of which you can access in Settings > Device > Calibration, where
you can click "Run Fitting Guide" and "Run Visual Calibration."
Before using your Lightwear, you should make sure it is level, it
rests comfortably around your head, there is a gap between your
ears and the Lightwear, and there is no pain or pressure on your head.
For more guidance, please use the Fitting Guide (in your Settings
menu on the device). Also make sure you can see clearly through
the Lightwear and that the nose pad rests comfortably on your nose
bridge. If the nose pad does not lift your Lightwear up such that
you can see clearly through your Lightwear, replace your nose pad
with another size and go through the Fitting Guide again. If Visual
Calibration fails, you may need to use the larger forehead pad.
You can use the Fitting Guide to help you find the right nose pad
and forehead pad sizes. Visit our Customer Care page at care.
magicleap.com for steps on how to fit your Magic Leap One.
Please make sure you adjust your Lightwear until you can see the
full display, can successfully complete Visual Calibration, and are
comfortable using the device. If you do not pass Visual Calibration,
adjust your fit via the Fitting Guide or read the section below