Plantui Moomin Garden 3 Anleitung Seite 6

English
Setting up
Check our Youtube channel @plantuicom for instruction videos.
1. Inserting the battery
1a. Remove the Plant Tray (16) from the Watering Unit (17). 1b. Open the pump by unscrewing the 2 screws on the top of the Watering
Unit (17) with a screwdriver and insert a new C-size (R14) 1.5V battery. We recommend a good quality long-life battery.
2. Adding water and nutrients
2a. Fill the water bowl (18) with 1 litre of water. NOTE: Do not exceed the water limit line on the inside of the bowl! Add 1 spoonful of
nutrients to the water. The nutrients are in the Plant Capsule package. The measuring spoon is attached to the Smart Garden box.
2b. Insert the Plant Tray (16) together with the Watering Unit (17) into the water bowl. 2c. Make sure to press them firmly to the bottom
of the bowl.
3. Inserting the Plant Capsules
3a. Detach the capsules. 3b. Place 3 capsules in the Plant Tray (16) and remove the centers of the labels. NOTE: Fill all 3 holes. It
is recommended to grow plants from the same growth groups together. You can find the estimated timelines on the Plant Capsule
packaging or visit – www.plantui.com/plant-capsules
4. Hanging up the Light Unit
4a. Fasten the hook (13) for example to the bottom of a shelf with a screw. Insert the cord of the Light Unit (14) over the hook. 4b. Place
the water bowl (18) underneath the Light Unit. Plug in the Light Unit.
Visit plantui.com for alternative Light Unit hanging accessories.
5. Turning on the device
5a. The Plantui 3 Smart Garden has 2 switches (15a, 15b): one on the Light Unit (14) and another on the Watering Unit (17). 5b. To turn
Germination. 5c. The pink lights will turn on and the irrigation starts. It's
the device on you need to turn both switches to position
time to grow!
Growth phases
6. Adjusting growth phases
When growing plants with a Plantui 3 Smart Garden please focus on 3 things:
2