Inhaltsverzeichnis - Nowsonic DBOX two Bedienungsanleitung

DBOX TWO
GB
User manual
Contents
Introduction
Features
Operating instructions
Operation
Inserting and changing the battery
Specifications
Scope of supply
Servicing
Introduction
Thank you very much for purchasing the Nowsonic DBox Two. This
active 2 channel Direct Injection-Box serves for connecting up to two
high impedance signals (such as instrument signals, 50 kOhm) or two
line level sources (such as a keyboard, DJ mixer etc.). The signals may
then be connected to the microphone inputs of a mixing desk or to
external mic preamplifiers via the balanced low impedance outputs
(600 ohms) of the DBox Two. Thanks to the rugged metal housing and
power supply from an internal battery, the DBox Two is equally suited
for use in a recording studio or on stage.
Please take your time to read these instructions carefully in order to
operate the DBox Two properly.
Please check the unit after unpacking for any damages. In case the
housing is visibly damaged, please do not operate the unit, but con-
tact your local dealer from whom you have purchased it.
4
www.nowsonic.com