Install The Battery - IconBiT PSS970BT Bedienungsanleitung

English

Install the battery

1. Open the rear casing of the device. Put the lithium-ion
battery inside the device. Make sure that the golden pins of
the battery and of the device have contact.
2. With the included mini USB cable you can charge the
PSS970BT. Please connect the USB cable with the "DC 5V"
port of the device and the USB port of your computer. The
PSS970BT will immediately start charging.
3. The power indicator LED turns red – that means your
PSS970BT is charging. The power indicator LED turns mixed
red, blue and white – that means your PSS970BT is in use
while charging.
1. Fidelity magnetic speaker
2. Passive speaker
3