Apeman M4 Benutzerhandbuch Seite 7

Instruction Manual
Charging The Projector
·
The Projector should be charged with the provided AC Adapter.
When the LED Indicator lights on in White and flashes, the Projector is currently
charging. Each LED light stands for 25% power, when all the 4 LED lights are
on, the Projector is fully charged.
IMPORTANT: Fully charging the internal battery of the Projector before first
use (about 3 to 5 hours). The approximate run-time is 2 hours.
Only one LED light is on and flashes means low power. Use the provided AC
Adapter to charge your Projector. Otherwise, the Projector will automatically
shut down when the power is too low.
Set Up
·
Connect the Projector with the provided AC adapter & USB charging cable,
and plug the other end of the charging cable into an electrical outlet.
Connect one end of the HDMI cable (provided) to the HDMI port and the other
end to your device.
Note: You may need an adapter to connect your device to the HDMI cable.
IMPORTANT: Apple® devices require an Apple Digital AV Adapter (sold separately)
for HDMI use.
For the other devices, check the manufacturer's instructions. Additional adapter
specialized to your device may be required(e.g. Micro/Mini HDMI).
Connect an external speaker to the 3.5mm audio output jack, if desired.
3