Precautions And Safety Instructions - Agrilight AVILED premium blue Bedienungs- Und Montageanleitung

4 Precautions and safety instructions

General precautions
• First read the safety instructions before starting the
installation or use of the product!
• It is of utmost importance to the manufacturer that the
product is used and maintained in a manner that ensures
the safety of the users. To guarantee a safe and reliable
use, proceed as follows.
1. Read the manual and safety instructions before the product
is installed.
2. Make sure that all people involved in the installation and
commissioning know the relevant parts of the manual and
safety instructions before the installation and commissioning
of the product takes place. Make sure that these instructions
are really understood. The responsibility for this lies with the
person responsible for the installation.
• Always comply with the safety instructions. If the safety
instructions, warnings and instructions are not followed, this
may lead to serious or lethal personal injury and to damage
to the installation.
• If connected, the product (or components of the product)
are powered by a 230V power supply.
• To ensure proper and safe operation, preferably original
components of the manufacturer should be used, or
components of at least the same quality.
• Some caution should be exercised when handling the
fixture(s), also to prevent damage due to mechanical
overload of the components.
• Avoid jolts and other unintended loads during transport,
assembly and use of the fixture and other products.
• Fixture glasses must not be removed, because this may
damage the sealing. Removing the fixture glass will
terminate the product warranty.
Installation
• It is important that the product is installed by a qualified
installer. If this is not the case, this will terminate the product
warranty.
• When complying with the installation guidelines, at the same
time the general and local building, safety and installation
regulations must be respected.
• Always block traffic in the area where the product is
installed, before installation starts.
• Keep the direct environment free of animals and of (internal)
transport during the work.
• Use insulated tools only!
• Make sure that the electrical power supply corresponds
to the voltage and amperage needed for the product as
indicated on the label.
• For the electrical connection, refer to the wiring diagram
of the manual, and comply with the local legal connecting
conditions (e.g. in the Netherlands: NEN 1010).
• Make sure that the wiring is not tensioned and that it does
not get loose or stuck between parts.
• Before you open a plastic cover of a fixture, make sure it is
disconnected for a safe operating situation.
• The manufacturer does not accept any liability for any
damage resulting from incorrect assembly.
Maintenance
• Always disconnect the product before performing work to
the product.
• Please bear in mind that both fixture glasses and lamps get
hot, and may cause serious burns. Let the lamps cool down
for at least 30 minutes after switching off the fixture, before
handling it again.
Malfunctions
• When checking malfunctions, be aware of the potential risk
of electrically live parts.
Although products are designed with safety in mind and
are earthed, hazards due to malfunctions can never be
excluded. Only qualified electricians are permitted to handle
the
electrical installation and to perform measurements on
the unit.
• Always disconnect fixtures before opening the plastic cover
(turn off the main switch and lock it with, for example, a
padlock).
Be aware of and prevent any accidental activation by
others or by an automated control and/or dimmer switch.
• In the event of a malfunction, never touch the product
whilst the power supply is still connected, if the casing is
damaged, or when the product is wet.
Correct removal of products
• The symbol on the product, the accessories or packaging
indicates that this product must not be treated as household
waste. Dispose of the product via a collection point for
the recycling of waste electrical and electronic equipment
within the EU and in other European countries that operate
separate collection systems for waste electrical and
electronic equipment.
13