Eldom Antracyt HLC01 Bedienungsanleitung Seite 9

GENERAL DESCRIPTION
1. ON/OFF switch
(operation mode)
2. Indicator light
3. Carrying handle
4. Air blowing opening
5. Air inlet
6. The flame effect
TECHNICAL DATA
- power: 1500W
- supply voltage:
230V ~ 50Hz
HOW TO USE THE APPLIANCE
HLC01 ceramic heater has many advantages, with the major ones being: the state-of-the-art
ceramic heating element and the insert imitating a genuine fireplace hearth. The ceramic
technology increases the operational efficiency of the device so that it heats up quickly and
evenly. The "FLAME" function, which can be activated independently of the heating function
can be used to obtain a cosy fireplace effect.
- After unpacking the appliance, make sure it has not been damaged during transport.
In case of any doubts, do not use the appliance until consulting a service centre.
Put the appliance onto a flat, stable and high temperature resistant ground.
- Turn the switch (1) to position "
- Connect the appliance to a power source with parameters in accordance
with the Instructions for Use.
- choose operation mode by turning the knob (1):
FLAME
LOW - hot air
HIGH - very hot air
- The appliance work is signaled by control lamps (2)
When used for the first time, the heating elements and insulation can emit characteristic smell.
It is a normal phenomenon.
In the base of the appliance there is a switch which cuts off power supply in case of
overturning.
Do not cover outlets when the appliance is in operation.
CLEANING AND PRESERVATION
- Before cleaning remove the power cable from the socket
- The appliance cannot be submersed in water
- Do not use any cleansing agents which are strong and damage the surface
- Wipe the housing with a moistened cloth
INSTRUCTIONS FOR USE
3
2
1
5
O
" (appliance turned off).
9
HEATER HLC01
6
4
FOT. 2