Customising A Timer Programme; Calibrating The Room Sensor - De Dietrich CDR4 Installations-, Bedienungs- Und Wartungsanleitung

CDR4 - Package AD253 - Package AD284
+
MODE
%
0 2 4 6 8 10 12 14 16 18 20
$
MODE
C002393-C
1 2 3 4 5
1 2 3 4
%
0 2 4 6 8 10 12 14
$
MODE
C002436-A
% $
+
23/06/2011 - 300020530-001-C
3.2.2.
Only the timer programmes P2, P3, P4 and the domestic hot water
programme P r can be modified.
1. Press the MODE and r keys simultaneously for 2 seconds. The
2"
A000858-A
2. Turn the rotary button to select the timer programme to be
22 24
3. All of the days flash. The new programme will be active every day
6 7
5 6 7 4. Turn the rotary button to the left until 0.00 is displayed. The first
16 18 20 22 24
5. b : Comfort mode selection
3x
6. To return to the principal display, press the MODE key or wait 20
3.2.3.
1. Measure the room temperature with a thermometer.
2. Press key Cx and Vm simultaneously for 5 seconds.
5"
C002430-A

Customising a timer programme

time is displayed.
modified. To confirm, press the rotary button.
To go back to the previous display, press the key r.
of the week.
To modify the programme for a particular day, press the rotary button
several times until the desired day flashes.
segment of the graphic bar for the timer programme flashes.
Press the Cx key. The symbol b is steady, the selection mode for
the comfort time ranges is active.
To select a comfort time range, turn the rotary button to the right.
The zone selected is displayed under b on the graphic bar.
v : Reduced mode selection
Press the Cm key. The symbol v is steady, the selection mode for
the reduced time ranges is active.
To select a reduced time range, turn the rotary button to the right.
The zone selected is displayed under v on the graphic bar.
seconds.

Calibrating the room sensor

The symbol CAL and the current temperature are displayed.
3. Operating instructions
EN
43