Adjusting Your Image; Adjusting Brightness; Diffused Reflection Prevention Sheet - Samsung UF-80 series Benutzerhandbuch

Adjusting your image

Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected
image. Some of the main features are described below:
Adjusting image size
Press WIDE or TELE button on the remote controller to change the image size displayed on the screen.
You can also use ZOOM
LAMP

Adjusting brightness

Press BRIGHT button on the control panel or BRIGHT + button on the remote controller to lighten the overall image.
Press BRIGHT button on the control panel or BRIGHT - button on the remote controller to darken the overall image.
OOM FREEZE
AWC
+
-
INT/EXT
In case of presenting glazed photograph, turn off the upper lamp and press
of the control panel or BRIGHT- button of remote controller.

Diffused Reflection Prevention Sheet

When conducting a presentation of a document with a reflective surface, the light settings in the environment
may cause a diffused reflection. In such settings, place the glossy side of the prevention sheet on the reflective
surface of the document.
Caution
1.Hold the corners of the sheet gently when using.
2.Make sure the glossy side of the sheet is laid on the reflective surface of the document.
3.Do not bend or shake the sheet and keep it in a cool and dry area.
4.Avoid contact with water and do not leave it under direct exposure of the sun or in high temperature.
5.Clean the sheet with a soft cloth or cotton with ISA.
or ZOOM
+
-
ZOOM FREEZE
AWC
+
-
INT/EXT
AF ROTATE
BRIGHT
button of the presenter to achieve the same result.
button
23
Page