Special Safety Instructions; Main Components - rawlink 79832 Bedienungsanleitung

SOLDERING IRON WITH HOLDER
Introduction
To get the most out of your new soldering
iron, please read through these instructions.
We also recommend that you save the
instructions in case you need to refer to
them at a later date.
Technical data
GB
Voltage/frequency:
Power rating:
With 4 tips, solder, cord, holder and cleaning
plate with cleaning sponge

Special safety instructions

The soldering iron must only be used for
soldering jobs.
Check that the soldering tip is correctly
positioned in the heating element before
you turn the soldering iron on. The
soldering tip must be inserted fully into
the holder and properly secured using the
locking screw.
Do not touch the heating element or the
soldering tip during or after use, as they get
very hot.
Make sure the cord does not come into
contact with the hot parts of the soldering
iron.
Be aware that the heating element or
the soldering tip can ignite �ammable
materials. Therefore always allow the
soldering iron to cool down fully in the
holder.
Ensure there is sufficient ventilation during
use.
14
1
230 V ~ 50 Hz
30 W

Main components

1. Extra tip
2. Adjustable holder for workpiece
3. Holder for soldering iron
4. Cleaning sponge
5. Soldering iron
6. Heating element
7. Tip
8. Base
9. Drawer
3
4
2
2
8
7
9
5
6