Aigostar 310000JT Bedienungsanleitung Seite 5

Upper cover
6
Screen cover
7
Using your garment steamer
Before first use
Remove any sticker or protective cover from the steam head.
Unwind and straighten the cord before use.
When operating the garment steamer for the first time, allow it to steam for a few minutes. This
will remove any impurities and odor that might have been left by the manufacturing process.
When operating the garment steamer for the first time, you need to test the steamer on an old piece
of fabric before steaming your garment.
Warning: to avoid an electrical circuit overload, it is recommended that do not plug other
electrical appliances into the same circuit as your garment steamer.
Note: Before discarding the package, check that you have received all the attachments.
Assembling/operating your garment steamer
1. Pull out the water tank, open the water inlet cover and fill tap water into the water tank until it
reaches the MAXIMUM level. Always ensure the water tank is at least a third full. Do not
exceed the MAXIMUM level when filling the water tank. Put back the water tank.
2. Hold the appliance with your hand positioned safely at the neck of the garment steamer. In an
upright position, use your other hand to attach the fabric brush onto the steam head. The fabric
brush and will lock into position with an audible "click".
3. Connect the appliance to a power outlet and switch on. Press the power button and the blue
light will flash and the device will start heating. You may start to use it when the blue light
stops flashing and keeps on.
4. Press the power button again, the light turn green, at this time for the ECO mode.
5. Switch off the steamer by press the power button more than 2 seconds.
6. The garment steamer has a intelligent automatic power off function. When the user stops
operating this product more than 8 minutes time, the product of internal control circuit will be
cut off power supply, products will enter standby mode, It can ensure more safety and save
energy. At the same time, the red power off indicator flashes. In the secondary operation,
press the steam button or the power button to restore the power supply.
7.
When the water in the tank is less than the minimum, the pump will automatically stop
working within 25-35 seconds。At the same time, flashing red light indicates a lack of water.
How to steam your garment
The garment steamer is easy to use and is perfect for removing wrinkles/creases from garments
and curtains as well as refreshing furnishing fabrics.
It can be used to iron most fabrics. First, hang the clothes; second, hold the garment steamer
upright; third, move the steamer up and down until the clothes is ironed.
NOTE: the garment steamer is designed to be used in an upright position on hanging garments.
Refrain from using the steamer in or on garments in a horizontal position.
Net cloth brush
13
Hair brush
14