Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13
Bring the backrest, using the side lever,
into it's backmost position.
15
Now place the tilt mechanism onto the prefabricated
screw holes as shown. The adjustment for tilt should
show to the front edge of the seat.
17
Then tighten the screws crosswise with
the universal tool.
14
14
Turn the chair over so that the bottom of the
seat is showing upwards.
16
First screw in the M8 screws provided by hand only.
18
Grease the axles of the tilt mechanism lightly. This will
make the assembly of the plastic levers easier.
Werbung
