Please read and observe ...
Cleaning
Risk of infections!
Infections can be spread by skin contact.
All articles/device components, which can come into
contact with the user during tanning, must be disinfected
after every tanning:
• Protective goggles
• Pillows
• Control panel
Acrylic glass shield and screen
Caution!
Do not rub with a dry cloth – danger of scratching!
For fast, hygienic proper cleaning of acrylic glass surfaces,
use exclusively the specially developed fast disinfectant
®
cleaner Antifect
.
Other cleaning agents, especially concentrated
disinfectants or solvents (e.g. Lysoform, ethyl alcohol or
other liquids containing alcohol), may not be used for
cleaning.
Failure to observe this voids all guarantee claims.
®
Order numbers for Antifect
: See the operating instructions for the
tanning system.
32
Lamps
UV low-pressure lamps: Clean with plain water (damp cloth).
Plastic surfaces
For cleaning the other plastic surfaces, it is best to use warm water and
a leather cloth. Never use aggressive cleaning agents containing alcohol,
e.g. the commercially available Sagrotan, or essential oils. These may
lead, in the long run, to damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber
seals must be expected for production-related reasons.
Note:
Prevent damage to the acrylic glass and plastic surfaces.
Remove rings, watches, bracelets etc. before the start of
cleaning work.
02756 / 0