Device Replacement - QUNDIS Q module 5.5 heat RHM5 00AN series Montage-Und Installationsanleitung

Replacing the calculator unit/heat meter
Q AMR • Log off the calculator unit/heat meter to be replaced
• Carry out device replacement
• Log on the new calculator unit/heat meter in the
Q walk-by
• Carry out device replacement
• Activate Q walk-by mode (see the section "Starting
Replace radio add-on module
When the add-on radio module is replaced, the network node must not
be reprogrammed.
The device number transmitted is read out of the calculator unit and
transmitted to the network node by the new module as before.
Proceed as described under "Setting the radio add-on module in place".
08.09.2017 / V1.0
from the Q-AMR network
Q-AMR network (see the section "Starting installa-
tion telegrams")
installation telegrams")

Device replacement

FUM5-00MO-DES-RHMHE
en
19