STARTUP
4.2
4
4.3
24
Installing the compressed-air connection
1. Remove the protective cap from the
compressed air connection (21).
2. Install the correct quick disconnect adapter
(1/4) into the compressed air connection (not
included in the delivery).
Connect the compressed air lines of the actuator
1. Connect the control lines (9) of the actuator.
Observe the correct color-coding of the
connections!
2. Connect the atomizing air line (10).
SULZER MixCoat
9
10
TM
DPF 1500-15 / DPF 1500-30 Operating Instructions
21
Version 1.0 English