Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote Control and Mounting
Remote Control
Mounting Instructions
• Connect the bracket (d) to the bottom of the speaker cabinet (e) by using the supplied screws.
• Use the screws to connect the base plate (b) to the stand (c) before attaching to the bracket (d).
Powering ON/OFF
To turn ON and OFF, long press the
ker will automatically shut off.
Adjusting the Volume
Long press the VOL+/
Long press the VOL-/
Press the
key on the remote control to mute the sound. Press again to turn the sound back on.
Using a MicroSD card
Push the MicroSD card into the MicroSD card slot with the metal contacts facing DOWN. The card will stick out of
the slot about halfway. If you have music on the SD card, when it is inserted the mode will switch and the music
will start playing automatically.
Playing Music via Bluetooth
Make sure the Bluetooth connection between the speaker and the Bluetooth enabled device is active (See Pairing
Bluetooth Devices).
Play/Pause
Short press the MODE button on the speaker or the
pause.
1
ON/OFF
2
DSP Sound effects (only in
MicroSD/USB mode)
3
Mute volume
4
VOL+ Increase volume
5
Previous Track
6
Play/Pause
7
Next Track
8
VOL- Decrease volume
9
BT Bluetooth mode
10
USB MicroSD/USB mode
11
AUX AUX mode
Basic Operations
button on the speaker. If the speaker remains idle for 15 minutes, the spea-
button on the speaker or the VOL+ key on the remote control to Increase the volume.
button on the speaker or the VOL- key on the remote control to decrease the volume.
Mounting
key on the remote control to play a track. Press again to
a Screws
b Base plate
c Stand
d Brackets
e Cabinet
6
Werbung
