Herunterladen Diese Seite drucken

Bernstein NT7306B Montageanleitung Seite 3

Duscharmatur

Werbung

HINWEISE:
1. Achten Sie auf waagerechten Einbau. Wasserwaage integriert.
2. Spülen Sie die Wasserleitungen vor der Installation, um Fremdkörper auszuschwemmen.
3. Der Anschluss für heißes Wasser erfolgt links und der für kaltes Wasser rechts.
4. Der Spielraum für die Montage darf weder über- noch unterschritten werden.
5. Der Montagespielraum beträgt 0 - 15 mm.
6. Entfernen Sie die Schutzabdeckung.
7. Demontieren Sie den Armaturengriff in der dargestellten Position.
8. Befestigen Sie den Halterahmen und die Glasblende wie abgebildet.
NOTE:
1. Pay attention to horizontal installation.
2. Rinse the water pipes prior to installation to flush out foreign objects.
3. The connection for hot water is on the left and for cold water on the right.
4. The scope for assembly must not be exceeded or fallen short of.
5. The mounting range is 0 - 15 mm.
6. Remove the protective cover.
7. Disassemble the fitting handle in the position shown.
8. Attach the mounting frame and the glass panel as shown.
REMARQUES:
1. Faites attention à l'installation horizontale.
2. Rincez les conduites d'eau avant l'installation pour éliminer les corps étrangers.
3. La connexion pour l'eau chaude est à gauche et pour l'eau froide à droite.
4. Les possibilités de montage ne doivent pas être dépassées ou dépassées.
5. La plage de montage est comprise entre 0 et 15 mm.
6. Retirez le couvercle de protection.
7. Démontez la poignée de montage dans la position indiquée.
8. Fixez le cadre de montage et le panneau de verre comme indiqué.
NOTA:
1. Prestare attenzione all'installazione orizzontale.
2. Risciacquare i tubi dell'acqua prima dell'installazione per sciacquare oggetti estranei.
3. La connessione per l'acqua calda è a sinistra e per l'acqua fredda a destra.
4. Il campo di applicazione per il montaggio non deve essere superato o inferiore.
5. La gamma di montaggio è compresa tra 0 e 15 mm.
6. Rimuovere il coperchio protettivo.
7. Smontare la maniglia del raccordo nella posizione mostrata.
8. Fissare il telaio di montaggio e il pannello di vetro come mostrato.
3

Werbung

loading

Diese Anleitung auch für:

Nt7306