Scope Of Delivery; Device Description; Initial Startup - Kärcher Gateway Bedienungsanleitung

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Device description

Function
This gateway connects KÄRCHER smart devices to a
WLAN network.
It is controlled using the Kärcher Home & Garden app,
which is available free of charge from the Apple App
Store or Google Play Store.
Control elements
Gateway
WLAN LED
1
LED strip
2
MAC address
1
WPA key
2
QR-code pairing
3
Recess for wall mounting
4
Power supply socket
5
Reset button
6
Hollow plug
1
Note: Commissioning is performed via the KÄRCHER
Home&Garden app. Please be sure to follow the in-
structions provided in this app to be sure that you are up
to date.
1. Load the KÄRCHER Home&Garden app from the
Apple App Store or from the Google Play Store.
2. Open the KÄRCHER Home&Garden app.
1
3. Switch to "Add product".
4. Create an account (if you are not already regis-
2
tered).
5. Insert the hollow plug of the power supply into the
gateway socket.
6. Plug the power supply into a power socket.
The boot process starts and can take several min-
utes.
7. Scan the QR code of the gateway.
8. Select "Kärcher-Gateway" as the access point in the
WLAN search on your smartphone.
9. Enter the previously scanned QR code of the gate-
way as the WLAN password or manually enter the
WPA key on the type plate of the gateway.
10. The connection is checked when you return to the
KÄRCHER Home&Garden app.
11. Select the home network and enter the password.
Correct installation is confirmed if the connection
test is successful.
Note: Position the gateway in the same floor of your
home and as close as possible to the watering valve.
The optimum position is at a window.
Important: If a MAC filter or additional firewall is set up
in your WLAN router then you must enable the MAC ad-
dress of the gateway in your router. The MAC address
is specified on the type plate of the gateway.
If necessary, the units can be attached to a wall. The
screws used must not exceed the following dimensions.
 Screw head diameter: 9 mm
 Screw head height: 2.7 mm
 Thread diameter: 4.2 mm
English
Power supply

Initial startup

Starting up the gateway
Wall mounting
Gateway
1
7