Klarstein 10030612 Gebrauchsanleitung Seite 7

Operating the scales
1. Please put the scale on a hard and flat surface.
2. Place bowl (if used) on the scale before turning on the unit.
3. Press and release ON/ZERO button to turn on the unit.
4. Wait until display prompts to '0g' before starting weighing.
Convert weight unit
Press the button 'UNIT' to convert between 'g' (grams) and
'oz' (ounces).
ZERO or TARE function
To weigh different loads consecutively without removing loads
from the scale.
1. Put first load on the scale, geht weight reading.
2. Press ON-ZERO to reset the LCD reading to „0" before
adding next load.
3. You can repeat this operation .
ZERO function
(If total sum of all loads on scale is less than 4 % of the max.
capacity).
LCD show „o g" each time ON-ZERO is pressed. lcon 'O' will
show on left lower corner of LCD, indicating 'ZERO' function is
active. Max. weight capacity remains unchanged.
7