Logic Functions; Decoder Functions And Cv Settings - Marklin Digital 60985 Bedienungsanleitung

circuit board. We therefore speak of physical functions. A
unique mode/effect can be assigned to each physical output
(AUX / lights) in digital operation. Three CVs are available for
each output for this purpose. Only one mode/effect can be set
for each output. A complete table for this can be found on the
Internet at:
http://www.maerklin.de/de/service/technische-informationen

Logic Functions

Since these functions are only executed by software, no phy-
sical output is required for them. We therefore speak here of a
logic function.
Acceleration/Braking Delay
• The acceleration and braking time can be set separately from
each other.
• The logic function ABV can be assigned to any function but-
ton by using the function mapping.
Switching Range (RG)
• The switching range causes a reduction in the current speed
of the locomotive. This allows a fine touch in the controlling the
locomotive. The switching range can be assigned in mfx and
DCC to any function button by using the function mapping.
Station Announcement
The locomotive does not go until after the announcement has
ended.
Opening Doors / Closing Doors
The locomotive does not start running as long as the function
"opening doors / closing doors" is active. The locomotive starts
accelerating according to the ABV that has been set/activated
only when the function has been deactivated and the sound has
ended.

Decoder functions and CV settings

The following pages have the functions and the CVs presented in
tabular form. These CVs can be given a number of settings and
can be assigned to a number of function buttons.
You'll find the CVs and their applications for the track formats fx
(MM) and DCC in separate tables.
The track format mfx can be easily set by using the display on
the CS 2 with Software Version 4.0 and higher. You or your dealer
may have to install an update on your 60213/60214/60215 Central
Station.
We recommend following the procedures that are shown and
described.
33