Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to pair ROCKit earbuds with Bluetooth devices
•
Simply remove your ROCKit earbuds from the charging case or
long press the X button on your earbuds for 10 seconds. After
the first 5 seconds, you will hear the ON sound. Keep press-
ing the button for another 5 seconds to turn on pairing mode,
indicated by flashing red and white LED lights
•
Please keep the earbuds and Bluetooth device in range of 1
meter when pairing and make sure ROCKit is turned on
•
Go into the Bluetooth settings on your device and search for
new Bluetooth devices and select ROCKit L
•
The LED light will blink white once ROCKit is successfully
paired
•
Long press X button on the earbuds to turn off your ROCKit
earbuds
•
ROCKit can remember 8 devices: You can pair 8 units with your
ROCKit, at 9th unit ROCKit will forget the first connected
Operation instructions for use after first pairing:
•
After first time pairing your ROCKit earbuds and Bluetooth
device will automatically reconnect
•
Turn the earbuds on by holding down the X button until you
hear the ON sound or by removing the earbuds from the case
•
Long press X button to turn off
7
Werbung
