Blumfeldt 10029443 Bedienungsanleitung Seite 9

Attaching cover to frame
1. Start by lifting one of the frame and inserting legs.
2. Drape cover over frame.
3. Next, lift the other side of the frame and insert remaining legs.
4. Hung up the all side panels and door panels.
Loosen the straps on the bottom of the legs when attach the cover. Adjust as needed
after the canopy is assembled.
Then hang up the all side panels and set up the foot and the ground bar (12,13,14)
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany
9