Devon&Devon Westminster Montageanleitung Seite 11

ASSEMBLY INSTRUCTIONS
1)
After removing the structure components from the packing, rest the metal
structure on a work surface. Note that at the corners of the structure there is
a small difference between the top part and the bottom: in the bottom the
straight parts project slightly compared with the curved one.
2)
Insert the leg with its
threaded bar in the structure so
that the leg reaches its contact
position from the lower part of
the structure.
3)
Screw the support on the
threaded bar from the opposite
part of the structure until the leg is
locked. Repeat these operations
for both legs.
12