Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The receiver
1 Antenna B
2 Output jack
3 Power supply
4 Antenna A
5 On/Off switch
Installation
• Plug the receiver to an electric outlet [3]. The green
LED [6] shows that the device is on.
• Position the two antennae vertically and make sure
that the receiver is free-standing.
• Connect the receiver with Output to an amplifer.
Please follow the safety notes below to avoid malfunctions, damages or physical injuries:
• Do not leave packaging materials in reach of children. Plastic bags may become a dangerous toy for children.
Do not modify the device.
• Do not disassemble the unit or attempt to repair it yourself. The device does not contain parts serviceable by
you. If you have any questions or problems regarding the device, please feel free to contact our customer ser-
vice for advice.
• The device should be kept away from moisture and direct sunlight.
• Only power the device with suited voltage. Never connect the device with any other incompatible voltage than
recommended.
WARNING
Repairing the unit should only be made by a technician or an authorized service center. Do not open
the device under any circumstances. Incorrect installation and/or connection may lead to malfunction
or complete damage. Failure to follow these warnings and in case of any unauthorized handling, use or
repair; will void warranty of this product!
CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin
Receiver and Installation
6 Power LED
7 Volume headset A
8 LED headset A
9 Volume headset B
10 LED headset B
Safety Guide
11 Volume headset C
12 LED headset C
13 Volume headset D
14 LED headset D
6
Werbung
