Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following hints, consult your dealer or service center.
Note: Do not open the unit as there is a risk of electric shock. Under no circumstances should you try to
repair the set yourself; as this will invalidate the guarantee.
No power
E
nsure that the power cord is connect securely.
·
E
nsure that there is power at the AC Mains.
·
E
nsure that the batteries are inserted correctly.
·
No sound or poor sound
A
djust the volume.
·
No response from the unit
D
isconnect and reconnect the AC power cord, then turn on the unit again.
·
E
lectrostatic discharge, re-connect the AC power cord after a few seconds.
·
CD does not play
T
he disc is dirty. Clean the CD.
·
T
he disc is placed upside down. Remove and place the CD right side up.
·
U
se a finalized CD or correct format disc.
·
The CD skips tracks
E
nsure that the CD is not damaged or dirty.
·
E
nsure that program mode is deactivated.
·
Poor radio reception
E
lectrical interference in your home can cause poor reception. Move the unit away from them (especially
·
those with motors and transformers).
F
ully extend the telescopic antenna.
·
Poor cassette sound quality
D
ust and dirty on the heads, etc. Clean deck parts, see Maintenance.
·
U
se of incompatible cassette types (METAL or CHROME). Only use NORMAL (IECI) for recording.
·
The unit does not function properly while using batteries
B
atteries are dead. Replace the new batteries.
·
T
he polarities of the batteries are incorrectly positioned.
·
R
einsert the batteries ensuring the polarities (+/-) match the unit's indicated polarities (+/-).
·
File from USB device does not play
C
heck the file format. This product only support MP3 format.
·
Remarks:
I
f the unit is not used for 30 minutes or more, it will automatically enter STANDBY mode. Press the
·
PROGRAM/RESTART button to resume use.
I
f any anomaly occurs, switch the FUNCTION Selector to the TAPE(OFF) position, and then switch it
·
back to CD/MP3/USB or FM ST. position again.
Environmental information
All unnecessary packaging materials has been omitted. The packaging can be easily separated into three
materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
ENG-11
15

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10021828

Inhaltsverzeichnis