SOUND2GO BRIQ Studio Bedienungsanleitung Seite 38

BRIQ Studio
Pairing
Before using Bluetooth speakers, please pair the spea-
ker with your smartphone, MP3, computer or any built in
bluetooth device. Step:
Turn the speaker power ON. Upon power ON the spea-
ker will automatically be in pairing mode. Blue indicator
lights appear in slow flashing indicates „in pairing mode".
Ensure that the BT speaker is not paired or connected
to any other device.
Pairing process to note
When device detected S2GBRIQ, initiate and paired
them. Should device request for password, enter default
password „0000", press OK button to complete the
pairing. NOTE: If pairing fails, please refer to „Trouble-
shooting."
Pairing by NFC: Activate NFC on your musicsource and
hold it at the bottom of the BRIQ Studio near the NFC
logo. Confirm the connection.
33