Operation; Charging The Battery - SOUND2GO BRIQ Studio Bedienungsanleitung

(see illustration back cover page)
Turn off the device.
‹
Connect the included recharger cable to the charger
‹
connection (7) of the device.
Connect the recharger cable to a free USB port of
‹
a computer or to a suited USB charger (max. input
voltage 5V).
During the loading process, the indicator lamp (6)
flashes red. After termination of the loading process the
indicator lamp goes out.
when low power.Three hours charging time are needed for total
battery volume.
NOTE
► The charging time takes approx. 2 – 3 hours.
► Pls do not let your bluetooth speaker charge all the
time,otherwise it will reduce the battery life.
30

Operation

Charging the battery

You will hear continuous tick sound
BRIQ Studio